Loctite Retaining Compound

Product Details:

LOCTITE® 648 is a high strength retaining compound designed for the bonding of cylindrical fitting parts. Ideal for retention of parts with clearance fit or interference fit.

Features:

• Proven to be tolerant of minor contamination due to industrial oils
• High strength on all metals, including passive substrates (e.g. stainless steel)
• Prevents loosening: It fills all gaps between the cylindrical components and cures into a hard thermoset plastic. This unitizes the assembly and prevents loosening and leakage from shock and vibration
• Works on all metal substrates
• Tolerant towards minor surface contaminations

Product Details:

Loctite E102 is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond which starts to set in 90-120 minutes and reaches handling strength in 5.5 hours. It can be used as an adhesive for a wide range of material metal, glass, ceramic, wood, many rigid plastics etc. Cured adhesive is electrically insulator in nature. Following are key advantages:
 Long open time
 Develops fixture strength quickly
 Easy to apply throughout work-life
 Can be used for potting applications

Product Details:

LOCTITE® Product 7075 is a solvent-based surface activator. It is designed to promote the cure speed of Loctite anaerobic structural adhesives and sealants. TYPICAL APPLICATIONS Used where increased cure speed of Loctite anaerobic products is required. Especially recommended for applications with passive metals, inert surfaces or having large bond gaps 

Product Details:

LOCTITE® 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.

Additional Information:

• Delivery Time: 1-2 Days

Product Details:

LOCTITE® 638 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm. Ideal for use where high dynamic forces or cyclic loading is expected.

Product Details:

Product Details:

LOCTITE® Product 609 is a general purpose, low viscosity, single component anaerobic retaining adhesive for cylindrical joints. The product cures when confined in the absence of air between close fitting metal surfaces. TYPICAL APPLICATIONS Used to bond cylindrical fitting parts. Typical applications include rotor to shafts in fractional and subfractional horsepower motors. Locks bushings and sleeves in housings on shafts. Augments press fits.